One-touch connection (nfc), Help guide – Sony MDR-10RBT User Manual

Page 73

MDR-10RBT

One-touch connection (NFC)

Cannot make the one-touch connection.

If the smartphone is in a case, the headset may not react to the

touching. Remove the smartphone from the case.

If the smartphone does not vibrate, start the app on the

smartphone, and move the designated location of the

smartphone close to the N mark on the headset.

Depending on the smartphone or mobile phone you are using,

the NFC sensitivity may not be strong enough to connect the

headset with just one touch. In this case, follow the procedure

described in “

You cannot make a one-touch connection while charging the

battery because the headset cannot be turned on. Finish

charging first, and then make the one-touch connection.

You cannot make a one-touch connection because the headset

cannot be turned on while it is connected to the INPUT jack.

Remove the connecting cord from the headset.

SEARCH