Sony MDR-10RBT User Manual

Page 53

To select the “Priority on sound quality” mode
When the headset is in the “Standard” mode, turn it on while holding

the VOLUME + button down. The “Priority on sound quality” mode is

selected.

From the “Priority on stable connection” mode, turn on the headset

while holding the VOLUME + button down. Turn off the headset once,

then turn it on while holding the VOLUME + button down again.

To select the “Priority on stable connection” mode
When the headset is in the “Standard” mode, turn it on while holding

the VOLUME – button down. The “Priority on stable connection” mode

is selected.

From the “Priority on sound quality” mode, turn on the headset while

holding the VOLUME – button down. Turn off the headset once, then

turn it on while holding the VOLUME – button down again.

Notes

The playback time may become shorter, depending on the sound

quality and the conditions under which you are using the headset.

Depending on the ambient conditions in the area where you are

using the headset, intermittent sound may still occur, even if the

“Priority on stable connection” mode is selected.

SEARCH