Help guide – Sony MDR-10RBT User Manual

Page 36

MDR-10RBT

Pairing and connecting with other

BLUETOOTH devices

It is necessary to pair BLUETOOTH devices to establish a

BLUETOOTH connection. When pairing the headset with a

BLUETOOTH device, place the BLUETOOTH device within 1 meter

(3 feet) of the headset.

1. Enter pairing mode on the headset.

Press and hold the POWER button for more than 7 seconds.

Make sure that the indicator flashes blue and red alternately after

you release the button.

Note

If pairing is not established within about 5 minutes, pairing mode

will be cancelled and the headset will turn off. In this case, start

over from step 1.

2. Perform the pairing procedure on the BLUETOOTH device to

search for this headset.

“MDR-10RBT” will be displayed on the list of detected devices on

the screen of the BLUETOOTH device. If “MDR-10RBT” is not

displayed, repeat from step 1.

3. Select “MDR-10RBT” on the screen on the BLUETOOTH device

to pair both devices.

If passkey input is required on the display of a BLUETOOTH

SEARCH