Sony MDR-10RBT - Manual (Page 32)

3. Turn on the BLUETOOTH function on the iPhone.
Touch [OFF] to change it to [ON].
4. Touch [MDR-10RBT].
If passkey input is required, input “0000.”
A Passkey may be called a “Passcode,” a “PIN code,” a “PIN
number,” or a “Password.”
The above procedure is an example. For details, refer to the
manual supplied with your iPhone.
The headset and the iPhone are paired each other and
connected.
If they are not connected, see step 2 of “ Connecting with a paired
iPhone .”
Tip
To delete all pairing information, see “ What can I do to solve a
problem? ”
Note
Once BLUETOOTH devices are paired, there is no need for
pairing again, except in the following cases:
Pairing information is deleted after repair, etc.
32
SEARCH