Shutter priority, Help guide – Sony ILCE-5000 User Manual
Page 129
Interchangeable Lens Digital Camera
ILCE-5000
Shutter Priority
You can express the movement of a moving subject in various ways by adjusting the shutter speed, for example, at the
instant of the movement with high speed shutter, or as a trailing image with low speed shutter. The shutter speed can be
changed while recording movies.
1. MENU
→
(Camera Settings
) → [Shoot Mode] → [Shutter Priority].
2. Select the desired value by turning the control wheel.
3. Adjust the focus and shoot the subject.
The aperture is automatically adjusted to obtain proper exposure.
Note
If proper exposure cannot be obtained after setup, the aperture value on the shooting screen blinks. Although you can
shoot as it is, resetting is recommended.
Use a tripod to prevent blurring when you use a slow shutter speed.
The
(SteadyShot warning) indicator does not appear in shutter speed priority mode.
When the shutter speed is 1 second(s) or longer, noise reduction will be done after shooting for the same amount of
time that the shutter was open. However, you cannot shoot any more while noise reduction is in progress.
The brightness of the image on the monitor may differ from the actual image being shot.
Hint
When a faster shutter speed is used, moving subjects, such as a running person, cars, or sea spray appear as if they
are stopped. When a slower shutter speed is used, a trailing image of the movement of the subject is captured to
create a more natural and dynamic image.
4-487-944-11(1)
Copyright 2014 Sony Corporation
How to Use
129