Sony DSC-W30 - Manual (Page 53)

53
U
si
ng the
S
e
tu
p s
cr
een
For details on the operation 1 page 46
Setup 1
1
The default settings are marked with .
Selects the brightness of the LCD backlight when using the camera with battery pack.
• You can change the setting with (Screen display switch) button ( t step 5 in “Read This First”).
• Selecting [Bright] uses up the battery pack charge faster.
Selects the sound produced when you operate the camera.
Selects the language to be used to display the menu items, warnings, and messages.
Initializes the setting to the default setting.
1 Select [OK] with v on the control button, then press z.
The message “Initialize all settings Ready?” appears.
2 Select [OK] with v, then press z.
The settings are reset to the default setting.
• Make sure that the power is not disconnected during resetting.
LCD Backlight (DSC-W50/W70 only)
Bright Brightens.
Normal
Beep
Shutter Turns on the shutter sound when you press the shutter button.
On Turns on the beep/shutter sound when you press the control
button/ press the shutter button.
Off Turns off the beep/shutter sound.
Language
Initialize
OK See the following procedure.
Cancel Cancels the resetting.