Sony PFM-42X1S - Manual (Page 87)

31
(GB)
The following menu appears on the screen.
MENU E n d
A d j u s t P i c t u r e
C o n t r a s t
B r i g h t n e s s
C h r o m a
P h a s e
S h a r p n e s s
N o i s e R e d u c t . :
D y n a m i c P i c t u r e
C o l o r T e m p . :
O f f
: O n
O f f
S e l e c t = S e t
2
Select the Dynamic Picture mode with M/m.
On: Activates Dynamic Picture function.
Off: Activates Dynamic Picture function.
3
Press ENTER or < to return to the Adjust
Picture menu.
Color Temp.
You can set color temperature. Either select one from
“Cool,” “Neutral,” or “Warm,” or set values for each
gain separately. You can store up to three settings and
rename them (up to six characters in length.)
1
Select “Color Temp.” with M/m and press ENTER
or ,.
2
Select the color temperature with M/m and press
ENTER.
Cool: Sets the color temperature to high.
Neutral: Sets the color temperature to neutral.
Warm: Sets the color temperature to low.
User1 – 3: Sets values for each gain separately.
When you select “Warm,” “Neutral,” or “Cool,”
the menu returns to the Adjust Picture menu.
When you select “User1” to “User3”
When you select any of “User1” to “User3,” the
following menu appears on the screen.
MENU S e l e c t E n d S e t /
A d j u s t P i c t u r e
C o l o r T e m p . :
R e d G a i n
G r e e n G a i n
B l u e G a i n
N a m e S e t
U s e r 1
ENTER
Adjusting the Picture
Phase
Select “Phase” with M/m and press ENTER.
Adjust the phase with M/m/
RMax (50) to GMax (50).
M/,: Makes the overall picture greenish.
m/<: Makes the overall picture reddish.
Sharpness
Select “Sharpness” with M/m and press ENTER.
Adjust the sharpness with M/m/
range of MIN (–10) to MAX (+10).
M/,: Increases the sharpness of the image.
m/<: Decreases the sharpness of the image.
Noise Reduct.
Reduces image graininess and color noise.
1
Select “Noise Reduct.” with M/m and press
ENTER or ,.
The following menu appears on the screen.
MENU E n d
A d j u s t P i c t u r e ( U
C o n t r a s t
B r i g h t n e s s
C h r o m a
P h a s e
S h a r p n e s s
N o i s e R e d u c t . :
D y n a m i c P i c t u r e
C o l o r T e m p . :
O f f
L o w
: M i d
H i g h
S e l e c t = S e t
s e r 1 )
2
Select the Noise Reduct. mode with M/m.
Off: The image signal is displayed directly.
Low: Sets the Noise Reduct. processing to low.
Mid: Sets the Noise Reduct. processing to
medium.
High: Sets the Noise Reduct. processing to high.
3
Press ENTER or < to return to the Adjust
Picture menu.
Dynamic Picture
Enhances contrast by making white brighter and black
darker.
1
Select “Dynamic Picture” with M/m and press
ENTER or ,.