Sony PFM-42X1S - Manual (Page 81)

25
(GB)
Using On-screen Menus
Remote Mode
Selects the function of the Remote Commander.
ON: Activates a remote commander supplied with
the display or a TV.
Off: Disables the remote control function.
Note
When you change the Remote Commander mode, use the
buttons on the display unit. You cannot change the
Remote Commander mode using the Remote
Commander.
For details, see “Using Other Remote Commander
Models” on page 50 (GB).
Remote Only
Select On to disable the control buttons on the display
unit. The display can only be operated with the
Remote Commander.
To cancel the Remote Only mode, set “Remote Only”
to “Off” with the Remote Commander.
Note
The setting in this item is still retained when the AC
power cord is disconnected or when you turn on/off
the display with the Remote Commander.
If you lose the Remote Commander, you can cancel
the Remote Only mode by pressing the POWER
button and MENU button on the display unit at the
same time.
Input Select menu
This menu is used to switch the input signal.
For details on switching the input signal, see “Switching
the Input Signal” on page 26 (GB).
Unit Status menu
This menu is used for displaying various information,
including information on the internal status of the
display unit.
U n i t S t a t u s
M o d e l N a m e :
S e r i a l N u m b e r :
O p e r a t i o n T i m e :
S o f t w a r e V e r s i o
P F M - 4 2 X 1
2 0 0 0 0 0 1
0 0 0 0 1 H
n : 1 . 0 0
MENU S e l e c t E n d
Model Name
Indicates the model name.
Serial Number
Indicates the serial number.
Operation Time
Indicates the total number of hours of operation.
Note
Time spent in standby mode is not counted as part of
the Operation Time.
Software Version
Indicates the system software version.