Sony MVC-CD400 - Manual (Page 44)

model name1[MVC-CD400/CD250]
[3-075-356-12(1)]
44
filename[C:\MVC-CD400Nouhinn\3075356121\307535612MVCCD400U2\07bas.fm]
masterpage:Left
Preparation for viewing images using a computer (Finalize)
Finalizing a disc
You must execute finalization before
viewing images recorded with your camera
through a disc drive. Discs that have not
been finalized cannot be read with a disc
drive.
What is finalization?
• Finalization is required to view images
recorded with your camera through a disc
drive.
• You can record new images on a finalized
disc by initializing it again. Initialization
is automatically performed when a disc is
finalized using the camera. You must
execute finalization to view new images
through a disc drive. However, each time
you execute finalization, the disc
remaining space will decrease by
approximately 13 MB. Therefore, we
recommend that you execute finalization
for multiple images at a time.
• You can finalize a disc later, even if you
remove it from the camera.
• The disc drive must support MultiRead in
order to read discs that have been
finalized.
, Set the mode dial to SET UP,
and turn on the power.
The SET UP screen appears on the LCD
screen.
, Select [DISC TOOL] with v /
V on the control button, then
press B .
Select [FINALIZE] with v / V ,
then press B .
1
DISC TOOL
FINALIZE :
FORMAT :
INITIALIZE :
UNFINALIZE :
SELECT
2
DISC TOOL
FINALIZE :
FORMAT :
INITIALIZE :
UNFINALIZE :
OK
CANCEL
OK
Copying images to your computer