Sony MVC-CD400 - Manual (Page 32)

model name1[MVC-CD400/CD250]
[3-075-356-12(1)]
32
filename[C:\MVC-CD400Nouhinn\3075356121\307535612MVCCD400U2\04bas.fm]
masterpage:Left
Inserting the date and time on a still image
, Set the mode dial to SET UP.
The SET UP screen appears.
• When images are shot with the date and time
superimposed, the date and time cannot be
removed later.
• The date and time do not appear on the LCD
screen during shooting, instead, “
” appears
in the upper left corner of the LCD screen. The
actual date and time appear during playback
only.
, Select [CAMERA] with v / V
on the control button, then
press
B .
Select [DATE/TIME] with v / V ,
then press B .
• If you select [DATE], the date is superimposed
onto the image in the order selected with
“Setting the date and time” (page 17).
• On MVC-CD250, the [HOLOGRAM AF] item
is displayed as [AF ILLUMINATOR] and the
[BRACKET STEP] (page 116) item is not
displayed in
[CAMERA].
, Select the date and time setting
with
v / V on the control button,
then press z .
DAY & TIME: Superimposes the date,
hour, and minute onto the image.
DATE: Superimposes the year, month and
day onto the image.
OFF: Does not superimpose the date and
time onto the image.
After the setting has been completed, set the
mode dial to
, and shoot the image.
• You can also shoot images with the mode dial
set to S*, A*, M* or SCN.
• This setting is maintained even when the power
is turned off.
* MVC-CD400 only
DISC TOOL
FINALIZE :
FORMAT :
INITIALIZE :
UNFINALIZE :
SELECT
1 2
CAMERA
MOVING IMAGE :
DATE/TIME :
DIGITAL ZOOM :
BRACKET STEP :
RED EYE REDUCTION :
HOLOGRAM AF :
DAY&TIME
DATE
OFF
OK
3
CAMERA
MOVING IMAGE :
DATE/TIME :
DIGITAL ZOOM :
BRACKET STEP :
RED EYE REDUCTION :
HOLOGRAM AF : MPEG MOVIE
DATE
ON
±0.7EV
OFF
AUTO
PAGE SELECT