Handling discs Page 195
Page 195
Search
VAIO User Guide VPCEG2/VPCEH2/VPCEJ2/VPCEK2/VPCEL2 Series
Back
|
How to Use
Handling Discs
Read the following to protect data stored on discs and take proper care of discs.
Be sure to hold the disc by its edges and central hole without touching the recording
surface (playing surface), as shown below.
Fingerprints and dust on the surface of a disc may cause a read or write error. Be sure
to keep the disc clean.
Sony assumes no liability for any problems and damages to discs arising out of
adhesive labels affixed to discs. Refer to the manual carefully that came with the label
software or label paper, and use the labels under your responsibility.
To take proper care of discs
For normal cleaning, hold the disc by its edges and use a soft cloth to wipe the surface
from the center out, as shown below.
If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to
wipe the surface of the disc. Wipe off any remaining moisture with a dry soft cloth.
Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-
static spray which may cause damage to the disc.
© 2011 Sony Corporation
195