O f f – Alto-Shaam FRY TECH ASF-60E User Manual
Page 40
Electric Fryer Operation & Care Manual • 38
D E L U X E C O N T R O L O P E R A T I O N
PROGRAMMING THE CONTROL
“FILTER”
The filter program is a monitor to notify the operator to service the oil/shortening after
a specified number of product loads established and set in the filter count “FILTER
CNT”
programming function. This feature is set to “OFF” at the factory.
THE
NUMBER
OF
PRODUCT
LOADS
CAN
BE
ADJUSTED
BY
THE
OPERATOR
THROUGH
THE
FILTER
COUNT
PROGRAM
.
FILTER
COUNT
WILL
AUTOMATICALLY
ADJUST
FILTER
MONITOR
ALERTS
TO
ONE
OF
THE
THREE
SELECTIONS
SHOWN
AS
SET
BY
THE
OPERATOR
.
“Off”
When set to the “OFF” position, the filter monitor is disabled and will
not
notify the operator to service the oil/shortening.
“ALRM”
Set to alarm “ALRM,” this feature will provide an audible
alarm and the display will indicate “FILTER NOW” as a
reminder to the operator after every 15 product loads or
the number of processed fry loads set by the operator in the “FILTER
CNT”
program function. When set to “ALRM” additional fry loads can be
processed and the alarm can be silenced by pressing the ON/OFF power
key on the main control panel to the “OFF” position
“LocH”
When the program mode is changed to the lock “LOCH” position, an
audible alarm will sound and the fryer will become inoperable following
the number of processed fry loads set by the operator in the “FILTER
CNT”
program function. The control will only become operable after the
oil/shortening has been serviced.
Press the Up
or Down
arrow keys to scroll until “FILTER” appears in the
display. Press the Right
4
arrow key to enter the program. Display stops
flashing. Press the Up
or Down
arrow keys to toggle among the
available choices. When the desired setting appears, press the Right
4
arrow key to accept the selection. Display flashes. Press the Down
arrow key to advance the control to the next programming function.
A
L R
M
Filter
L
O C
H
Filter
O F F
Filter
O F F
Filter
Filter Now
To exit the control programming mode at any time, press and hold t
he LEFT
arrow key
.