Alto-Shaam FRY TECH ASF-60E - Manual (Page 32)

Electric Fryer Operation & Care Manual • 30
D E L U X E C O N T R O L O P E R A T I O N
PROGRAMMING THE CONTROL
“SetPoint
This program allows the operator to change the temperature of the frypot oil/shortening. The set-
point temperature of the oil/shortening can be adjusted from a range of 250°F to 450°F
(121°C to 232°C). The factory default is set at 350°F (177°C).
Press the Up  or Down  arrow keys to scroll until “SetPoint” appears in the display. Press
the right 4 arrow key to enter the program. Display stops flashing. The previously set
temperature will appear in the display. Press the Up  or Down  arrow keys to change
the setting. When the correct set-point appears, press the right 4 arrow key to confirm the
setting. Display flashes. Press the down  arrow key to advance the control to the next
program feature.
To exit the control programming mode at any time, press and hold t he LEFT
 arrow key .
3 5 0 °F
SetPoint