Avaya NN43170-100 - Manual (Page 121)

Configuring the Avaya 1165E IP Deskphone
121
Outgoing Call You can make an outgoing call by either
pressing the headset key on the IP
Deskphone or the Off Hook equivalent
key on the headset. When off hook, the
IP Deskphone streams dial tone to the
headset. This class of headset has no
dial pad and the telephone number must
be dialed using the key pad of the
IP Phone. After the call is connected,
voice data streams between the IP
Deskphone and the headset.
Call Release You can release an incoming call or an
outgoing call by pressing either the
Release (Goodbye) key on the IP
Deskphone or the On Hook equivalent
key on the headset. After a call is
released, audio data stops between the
IP Deskphone and the headset.
If you are using the Plantronics headset,
to release a call, press and hold the
answer/release toggle button for more
than two seconds.
Call Mute The mute key event is handled
independently on the headset. The
corresponding HID command is sent to
the IP Deskphone to synchronize IP
Deskphone status. Mute status
indication on the headset is also
independent. When muted, the headset
streams blank audio to the IP
Deskphone and the IP Deskphone also
mutes the audio to the far end (double
muted).
Table 14: Third-party USB headset with HID support features
(Part 3 of 4) (Part 3 of 4)
Feature Description