beautypg.com

5 pcipnp, Pcipnp -27, Plug & play o/s [no – Asus M3N WS User Manual

Page 95: Resources controlled by [auto, Irq resources, Maximum payload size [4096

background image

ASUS M3N WS

3-27

Plug & Play O/S [No]

When set to [No], the BIOS configures all the devices in the system. When set to

[Yes] and if you install a Plug and Play operating system, the operating system

configures the Plug and Play devices not required for boot.

Configuration options: [No] [Yes]

Resources Controlled By [Auto]

When set to [Auto], the BIOS automatically configures all the boot and Plug and

Play compatible devices. Set to [Manual] if you want to assign the IRQ DMA and

memory base address fields.

Configuration options: [Auto] [Manual]

When the item Resources Controlled By is set to [Auto], the item IRQ

Resources is grayed out and not user-configurable. Refer to the section IRQ

Resources for information on how to enable this item.

IRQ Resources

This sub-menu is activated only when the Resources Controlled By item is set to

[Manual].

Phoenix-Award BIOS CMOS Setup Utility

Advanced

PCIPnP

Plug & Play O/S

[No]

Resources Controlled By [Auto]

x IRQ Resources

**PCI Express relative items **

Maximum Payload Size

[4096]

Select Menu

Item Specific Help
Select Yes if you are

using a Plug and Play

capable operating

system Select No if

you need the BIOS to

configure non-boot

devices

Select Menu

Item Specific Help
Legacy ISA for devices

compliant with the

original PC AT bus

specification, PCI/

ISA PnP for devices

compliant with the

Plug and Play standard

IRQ Resources

IRQ-5 assigned to

[PCI Device]

IRQ-7 assigned to

[PCI Device]

IRQ-9 assigned to

[PCI Device]

IRQ-10 assigned to

[PCI Device]

IRQ-11 assigned to

[PCI Device]

IRQ-14 assigned to

[PCI Device]

Phoenix-Award BIOS CMOS Setup Utility

Advanced

3.4.5

PCIPnP

IRQ-xx assigned to [PCI Device]

When set to [PCI Device], the specific IRQ is free for use of PCI/PnP

devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices.

Configuration options: [PCI Device] [Reserved]

Maximum Payload Size [4096]

Sets maximum TLP payload size for the PCI Express devices. The unit is byte.

Configuration options: [128] [256] [512] [1024] [2048] [4096]