Asus M3N WS - Manual (Page 161)

ASUS M3N WS 5-3
To enable HybridPower
1. Follow Step 1 to 5 on the previous page to complete the hardware and driver
installation.
2. If the driver is correctly installed, you will find the
Hybrid SLI icon on the taskbar.
The Hybrid SLI icon indicates that the system is in Performance mode and
that rendering is being done by the dGPU. The mGPU is being used only to
drive the display.
3. Click the Hybrid SLI icon and select Save
Power.
4. The icon will change state (from to ) to
indicate that the system is in Power Saving
mode, which means that the dGPU is turned off
and the mGPU is both rendering and displaying.
5. When the Power Saving mode is enabled, the dGPU does not show in the
Windows ® Device Manager.
Power Saving mode is disabled. When the Power Saving mode is enabled, the
dGPU is turned off and does not appear in the
Device Manager.