Asus M3N WS - Manual (Page 105)

ASUS M3N WS 3-37
3.6.4 Security
Select Menu
Item Specific Help
Security
Supervisor Password Clear
User Password Clear
Password Check [Setup]
Phoenix-Award BIOS CMOS Setup Utility
Boot
Supervisor Password
User Password
These fields allow you to set passwords:
To set a password:
1. Select an item then press .
2. Type in a password using a combination of a maximum of eight (8)
alpha-numeric characters, then press .
3. When prompted, confirm the password by typing the exact characters again,
then press . The password field setting is changed to [Set].
To clear the password:
1. Select the password field and press twice. The following message
appears:
PASSWORD DISABLED !!!
Press any key to continue...
OS Select for DRAM > 64MB [Non-OS2]
Set this item to OS2 only when you are running on an OS/2 operating system with
an installed RAM of greater than 64 MB.
Configuration options: [Non-OS2] [OS2]
Full Screen LOGO [Enabled]
This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Halt On [All, But Keyboard]
Allows you to set the error report type.
Configuration options: [All Errors] [No Errors] [All, But Keyboard] [All, But Diskette]
[All, But Disk/Key]