Aiphone AX-DV(F)-P - Manual (Page 2)

WIRING DIAGRAM:
TESTING AND OPERATION:
When power is applied to the card reader, the LED will flash green three (3) times while
the beeper beeps simultaneously. The LED will then turn red. This indicates that the
microcontroller is operating properly.
Present an ID card to the reader. (Hold card directly in front of reader.) The LED will
momentarily turn green while the beeper beeps once, indicating that the card was read
successfully.
CARD READER:
Model:
HID 6005B
Power Source: 5 ~ 16V DC
Current Requirements: 30mA (Avg); 75mA (peak)
Transmit Frequency:
125 kHz
Card Formats: Up to 85 bits
Terminations: Color-coded pre-wired pigtail
Wiring Distance: 500' to Host
Operating Temperature: -10° ~ 60°C / 14° ~ 140°F
Operating Humidity:
0-95% relative humidity
non-condensing
SPECIFICATIONS:
VIDEO DOOR STATION:
Camera unit:
CCD Camera
Scanning line: 525 lines
Min. illumination: 5 Lux at 1' or less
Terminations: RJ45
Operating Temperature: -10° ~ 60°C / 14° ~ 140°F
Wiring Distance:
980' with Cat5e
Dimensions:
AX-DV-P
3-15/16 ” W x 11-11/16” H x 1" D
AX-DVF-P 5- ¾” W x 11-⅝” H x 1-⅞" D
With SBX-DVF-P: 5-15/16" W x 11- ¾” H x 2-13/16" D (Top)
1-15/16" D (Bottom)
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
Pg. 2
AX-DV(F)-P Instr.
1008JD
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
E-MAIL: [email protected]
D1 D3 D5 D7
D2 D4 D6 D8
DOOR RELEASE RELAY
L1 L2 L3 L4 L5 L6 L7 L8
M1 M3
M2 M4
VCH1 VCH2
X1 OUT X2
AX-320C
CO + - + -
D-PS V-PS
RS-232C
POWER
VIDEO OUT
V1 V2
AIPHONE AX-084C
PS-2420UL
+
-
PS-2420UL
+
-
Output to Host
Access Control System
C
a
t5
e
Dry contact to
Access Control System
C
a
t5
e
20" pigtail cable
Connect the reader to the host according to the
wiring table at right and the host installation guide.
Wiegand Wire Color
+ DC (5-16V) Red
Ground Black
Data0 Green
Data1 White
Shield Ground Drain
Green LED
Orange
Red LED Brown
Beeper Yellow
Hold Blue
Card Present Violet