Ferguson Ariva Link TT - Manual (Page 25)

14. MENU
14.1 Operating the menu
Menu
Select an option with the p/q, t/u keys.
Enter an option with the OK key.
Values
Change values with the t/u keys.
Insert values with the 0-9 numeric keys.
Enter the edit window.
15. INSTALLATION
15.1 Antenna
Select the Antenna type.
Antenna Select the Antenna (A=LNB A, B=LNB B).
Fixed Select this option for a fixed antenna.
DiSEqC 1.2 Select this option for a DiSEqC 1.2 motor.
USALS
Select this option for an USALS motor. Enter the longitude
(East/West) and latitude (North/South) of your location.
Unicable/SCD
Select this option for a Single Cable Distribution Antenna to deliver
broadcast over a single cable to multiple users.
Select the user Band B1-B8.
Select the Band frequency.
Press MENU key to save.
15.2 Satellite search
Satellite
Select a satellite. Press key to select the LNB Input as your
antenna connection (A=LNB A, B=LNB B, A+B=LNB A+B).
Transponder Select a transponder.
LNB Select the LNB frequency.
22Khz Select On or Off.
DiSEqC
Select the DiSEqC (A, B, C, D)/Mini A, B port for the selected
satellite.
DiSEqC 1.1 Select the DiSEqC port (1-16) for the selected satellite.
Satellite position
This option is activated, if you selected Unicable/SCD antenna in
the Antenna menu. Select the position.
P1: User band B1, B2, B3, B4
P2: User band B5, B6, B7, B8
LNB Power Select the LNB power.
Search Press (blue) key to start the search.
Search options
All/FTA/NIT/FAST SCAN
Select an option to start the search.
Transponder Select this option to add, edit or search transponders.
DiSEqC/USALS Select this option to search all installed satellites
(DiSEqC, DiSEqC 1.2 & USALS) at one time.
PID Select this option to edit PIDs.
15.3 Edit satellite
Satellite
Select a satellite. If a satellite is missing, select a user define satellite
(Others) and enter the name.
Edit Press the (red) key to enter a new name or to rename a satellite.
Position Enter the position.
25