Ferguson Ariva Link TT User Manual
Page 14
For each LNB Input multiple antenna connections are possible (motorized, SCD, DiSEqC switch,
etc.).
9.2 Connecting to the TV via HDMI cable (recommended)
1. Connect the antenna to the LNB IN socket of the receiver.
2. Connect the HDMI to the receiver out and the television in.
Connection by means of an HDMI cable allows you to obtain the highest image quality.
If you have an amplifier with an HDMI out and in, which supports audio over HDMI,
connect the devices by two HDMI cables. As in the following figure: one cable to the
amplifier, and the other from the amplifier to the television set.
14