elektraLite MM 200 - Manual (Page 8)

7
NON DMX FUNCTIONS.
There are two functions, which are non-DMX, and which can be activated using the DIP switches. They are
marked on the dipswitches.
1. Automatic mode of operation. Turn this dipswitch on to activate the auto mode.
2. Focus function. When this dipswitch is on, the shutter will open and the color wheel will also be in open
position. This allows for easy focusing of the front lens without recourse to a controller. Note: MM 200
will not respond to any DMX control when in this mode.
CLEANING AND MAINTENANCE.
1. All bolts and safety chains must be tightly screwed into position and have no corrosion.
2. Regularly check all mechanic moving parts for wear. They must rotate freely and in no way stick or
squeak.
3. Regularly look for wear and tear on the 120 volt input cable and the DMX signal cable.
4. Clean
MM 200 at frequent intervals. Use a moist lint free cloth. Do not use a wet cloth or a cloth with
alcohol or solvents added. Clean the objective lens and the reflector weekly if in a smoky environment
or if fog machines are being used. Do not forget to turn off MM 200 and allow to cool down to room
temperature before opening. Watch that you don’t touch the lamp. If you do then you’ll have to remove
it and clean it.
5. Color and gobo wheel may require cleaning as often as once a month if in a smoky environment or if
fog machines are being used.
TECHNICAL SPECIFICATIONS
Power supply : 120VAC, 60 Hz.
Power consumption : MAX. 400 VA
Lamp : MSD200 GY9.5 socket, Metal Halide.
Motors: 4 Micro Motors
Packing dimensions : 58 x 39 x 44cm (23”x 15.5”x 11.5”)
Net weight :13.5 Kilos (30 pounds)
Gross weight: □16 Kilos (35.2 pounds)
[Errors and omissions for all information given in this manual is excepted.
All information is subject to change without prior notice].
Registering your MM 200
It is very important that you register your MM 200 so that you can receive any updates and have your warranty
in operation. To register please fill in the warranty form which can be found at
www.myelektralite.com
[Manual Updates. V1.12 = V1.10 + insert on 3 to 5 pin DMX XLRs].