elektraLite CP10xt Manual User Manual
Page 15
12
chase. Repeat the above with fixtures OTHER THAN THE ONES previously used. Press “Chase #
Go” to start the first chase. Press “Chase # Go” to start the second chase. If programmed correctly
the result will be both chases running together at their programmed chase speed and Xfade time.
Altering the chase speed and the Xfade time will affect only the most recently activated chase. To
stop the chases press “Black”. Up to 3 chases maybe run together. Trying to run a fourth chase will
display the message “3 chases running” in the LCD display.
See also other documents in the category elektraLite Lighting:
- eyeBall RGBWA (5-in-1) (15 pages)
- eyeBall DMX channel assignments Menus V2.2 (6 pages)
- eyeBall QUAD 7x12w LEDs (14 pages)
- eyeBall UV/IUV 18-3W LEDs (3 pages)
- Dazer RGB (15 pages)
- Cool White Dazer (12 pages)
- Warm White Dazer (12 pages)
- Variable White Dazer (13 pages)
- Dazer Theatrical White (13 pages)
- Pancake QUAD 36-12W Quad LED Moving Yoke (12 pages)
- Pancake RGBW 108-3W RGBW single source LEDs (13 pages)
- 1018 QUAD 18-12w QUAD LED (19 pages)
- 1018 RGBWA (5-in-1) (18 pages)
- ML-602 60W LED Moving Head Profile Spot (9 pages)
- LXE 700 Spot (20 pages)
- LXE 700 Wash (19 pages)
- PaintCan 2.0 (21 pages)
- CP10xt Quick Start (2 pages)
- CP16/24 (32 pages)
- MY 250 (25 pages)
- CP100xt Manual Part One (91 pages)
- CP100xt Manual Part Two (109 pages)
- CP100 Manual Part One (72 pages)
- P100 Manual Part Two (80 pages)
- CP1 (25 pages)
- CP3 (18 pages)
- CP20xt (55 pages)
- CP20xt (3 pages)
- MM 200 (10 pages)
- MB 150 (19 pages)
- MM 150 (19 pages)
- MY 150 (23 pages)
- Elektrik Eye (22 pages)
- MY 250w (2 pages)
- MY 250I (25 pages)
- MY 575w (24 pages)
- Moving Yoke 120v Spot (27 pages)
- UFO 8 (9 pages)
- elektraFog 1000w element Fog Machine (5 pages)