ROTHENBERGER ROCAM 3 Multimedia - Manual (Page 31)

ENGLISH 29
Start/stop recording Confirm selection
Delete
Zero position on metre counter
Zoom out Menu navigation: down
Zoom in Menu navigation: up
Reduce brightness Menu navigation: left
Increase brightness Menu navigation: right
Notes on proper handling:
Please use your ROCAM 3 Multimedia only with the USB stick included, or with USB sticks of 4
GB or more.
If you use a different USB stick than the one included, it should be formatted to FAT32. The sys-
tem does not recognize NTFS formatted sticks, and they must be properly reformatted. Further-
more the parameter „Size of the allocation units“ must be at least 16 kilobytes otherwise errors
can occur during recording.
Remove the USB stick only when you have securely logged out through the software, as described
in Point 6 above. Improper removal of the stick can lead to system errors.
1. Creating an inspection directory:
You can establish a directory for each inspection. Then all photos, videos and log entries (see
No.9) created during inspection will be saved into this directory.
Press the
button to open the main menu.
Use the navigation buttons to highlight „Create directory“. Press to confirm.
The camera now recognizes that no USB stick has been inserted. Highlight „Yes“ and confirm by
pressing