Nikon S9100 - Manual (Page 32)

20
First Ste
p
s
Setting Display Language, Date, and Time
When the first time the camera is turned on, the language-selection screen and
the date and time setting screen for the camera clock are displayed.
1
Press the power switch to turn on the camera.
The power-on lamp (green) will light, and then the
monitor will turn on (the power-on lamp turns off when
the monitor turns on).
2
Press the rotary multi selector
H
or I to choose the desired
language and press the
k
button.
3
Press
H or I to choose Yes and press the k
button.
To cancel the setting the time zone and date, select No.
4
Press
J or K to choose your home time zone
(
A 174) and press the k button.
Cancel
L a n g u a g e
Rotary multi
selector
Yes
No
Choose time zone and
set date and time?
Time zone and date
Cancel
C a s a b l a n c a
L o n d o n
Back
D
Daylight Saving Time
If daylight saving time is in effect, press H to enable the daylight
saving time function while setting the region in step 4.
When the daylight saving time function is enabled, W is displayed
at the top of the monitor. Press
I to disable the daylight saving
time function.
L o n d o n
C a s a b l a n c a
Back