Nikon S9100 - Manual (Page 100)

88
Camera Settings that Cannot Be Applied Simultaneously
More on
Sh
ooting
AF area mode
Smile timer (
A 37)
Face detection is used regardless of the AF
area mode setting.
Continuous (
A 80)
When shooting with Pre-shooting cache,
Continuous H: 120 fps, or Continuous H:
60 fps, AF area mode is fixed at Center.
Autofocus mode Continuous ( A 80)
When shooting with Pre-shooting cache,
Continuous H: 120 fps, or Continuous H:
60 fps, Autofocus mode is fixed at Single
AF.
Print date Continuous ( A 80)
When using any setting other than Multi-
shot 16, the date is not imprinted.
Motion detection
ISO sensitivity ( A 52)
Motion detection is disabled when the
ISO sensitivity is set to any setting other
than Auto.
AF area mode (
A 53)
When AF area mode is set to Subject
tracking, Motion detection is not
available.
AF assist Continuous ( A 80)
When shooting with Pre-shooting cache,
Continuous H: 120 fps, or Continuous H:
60 fps, the AF-assist illuminator does not
light.
Digital zoom
AF area mode ( A 53)
When AF area mode is set to Subject
tracking, digital zoom is not available.
Continuous ( A 80)
When using Multi-shot 16, digital zoom is
disabled.
Blink warning Smile timer ( A 37) Blink warning does not function.
Restricted
function
Setting Descriptions
B
Features Not Available in Continuous Shooting Mode
When using continuous shooting mode, the following features cannot be used.
• Flash mode ( A 32)
• Self-timer ( A 35)/Smile timer (A 37)
• Motion detection ( A 180)
• Blink warning ( A 188)
D
More Information
See “Notes on Digital Zoom” ( A 182) for more information.