Set the desired interval between each shot, Press the d button to display the shooting screen – Nikon P600 User Manual

Page 161

Re
fe

ren

Set the desired interval between
each shot.

• Use

JK to select an item , and use HI to

set the time.

• Press the

k button when setting is

complete.

Press the

d button to display the shooting screen.

Press the shutter-release button to
shoot the first image.

• The shutter is automatically released at the

specified interval to shoot subsequent
images.

• The monitor turns off and the power-on

lamp flashes during the intervals between
shots (when the battery is used).

When the desired number of images have been taken,
press the shutter-release button.

• Shooting ends.
• Shooting ends automatically when the internal memory or memory card

becomes full.

Notes About Interval Timer Shooting

• To prevent the camera from turning off unexpectedly during shooting, use a fully

charged battery.

• If the AC Adapter EH-67A (available separately;

E82) is used, this camera can be

powered from an electrical outlet. Do not, under any circumstances, use an AC
adapter other than the EH-67A. Failure to observe this precaution could result in
overheating or damage to the camera.

• Do not rotate the mode dial to a different setting while performing interval timer

shooting.

• If the shutter speed is slow and saving an image takes time compared to the

specified interval, some of the shots during Interval timer shooting may be
canceled.

Edit

Intvl timer shooting

1/250

1/250 F5.6

F5.6

840

25m 0s