Nikon Df - Manual (Page 231)

211
Q
Using ViewNX 2
Copy Pictures to the Computer
Before proceeding, be sure you have installed the software on the
supplied ViewNX 2 CD (0 208).
1
Choose how pictures will be copied to the computer.
Choose one of the following methods:
• Direct USB connection: Turn the camera off and ensure that the
memory card is inserted in the camera. Connect the camera
to the computer using the supplied USB cable and then turn
the camera on.
• SD card slot: If your computer is equipped with an SD card slot,
the card can be inserted directly in the slot.
• SD card reader: Connect a card reader (available separately
from third-party suppliers) to the computer and insert the
memory card.
A
Use a Reliable Power Source
To ensure that data transfer is not interrupted, be sure the camera
battery is fully charged. If in doubt, charge the battery before use
or use an AC adapter and power connector (available separately).
A
USB Hubs
Connect the camera directly to the computer; do not connect the
cable via a USB hub or keyboard.