Nikon Df - Manual (Page 115)

95
r
5
Position the target over a white or grey area.
While D flashes in the display, use the
multi selector to position the r over a
white or grey area of the subject.
6
Measure white balance.
Press J or press the shutter-release
button all the way down to measure
white balance. The time available to
measure white balance is that selected
for Custom Setting c4 (Monitor off
delay) > Live view (0 253).
If the camera is unable to measure white
balance, the message shown at right will
be displayed. Choose a new white
balance target and repeat the process
from Step 4.
When Preset manual is selected for
White balance in the shooting menu,
the position of the target used to
measure preset white balance will be
displayed on presets recorded during
live view photography.
A
Measuring Preset White Balance (Live View Photography)
Preset manual white balance can not set while an HDR exposure is in
progress (0 112).