Nikon Df - Manual (Page 190)

170
t
Location Data
Optional GP-1 and GP-1A GPS units (0 325) embed the following
information in photographs taken while the unit is attached:
longitude, latitude, altitude, and Coordinated Universal Time
(UTC). These data are displayed in the photo information location
data page (0 188).
❚❚Attaching a GPS Unit
Turn the camera off and connect the GPS unit to the accessory
terminal (0 325) using the cable supplied with the unit. See the
GPS unit manual for more information.
❚❚Setup Menu Options
The Location data item in the setup menu contains the options
listed below.
• Standby timer: Choose whether the exposure meters turn off
automatically when a GPS unit is attached.
• Position: This item is only available if a GPS unit is connected,
when it displays the current latitude, longitude, altitude, and
Coordinated Universal Time (UTC) as reported by the GPS unit.
• Set clock from satellite: Select Yes to synchronize the camera clock
with the time reported by the GPS unit.
Option Description
Enable
Exposure meters turn off automatically if no operations are
performed for the time selected for Custom Setting c2
(Standby timer, 0 251; to allow the camera time to acquire
location data, the delay is extended by up to one minute
after the exposure meters are activated or the camera is
turned on). This reduces the drain on the battery.
Disable Exposure meters do not turn off while a GPS unit is
connected.