Nikon Coolpix S3000 - Manual (Page 35)

23
Step 1 Turn the Camera On and Select A (Auto) Mode
B
a
sic Ph
ot
og
raph
y
an
d Pl
ay
back
: A
(A
u
to
) Mo
de
Indicators Displayed in A (Auto) Mode
• The indicators and photo info displayed during shooting and playback will turn
off after a few seconds (
A 132).
• When the monitor has turned off in standby mode to save power, press the
following button to reactivate it (
A 137).
- Power switch, the shutter-release button, or A button
D
Functions Available in A (Auto) Mode
• The flash mode ( A 30) can be adjusted and the self-timer (A 32), macro mode (A 33), and the
exposure compensation ( A 34) can be applied.
• Press the d button to specify settings for all shooting menu items (A 36) according to
shooting conditions.
D
Motion Detection
See Motion detection ( A 135) in the setup menu (A 125) for more information.
D
Electronic Vibration Reduction
• When the flash mode ( A 30) is set to W (off) or Y (slow sync) with Electronic VR (A 134) in
the setup menu set to Auto, the w icon may appear in the monitor.
• The appearance of w indicates shooting conditions in which the effects of camera shake can be
pronounced. In these situations, the camera reduces the effects of camera shake in pictures before
recording them.
1 1 1 1
Shooting mode
A displayed in A
(auto) mode.
Image mode
The combination of image
quality (compression) and
image size is displayed. The
default setting is
L 4000×3000.
Internal memory indicator
Indicates that images will be stored on the
camera’s internal memory (approximately 47 MB).
When a memory card is inserted in the camera, C
does not appear and images will be stored on the
memory card.
Motion detection icon
The effects of the subject
movement and camera shake
are reduced.