Nikon LS-30 - Coolscan III - Manual (Page 34)

- 34 - Using the Scanner: Using the MA-20 S
LIDE
M
OUNT
A
DAPTER
Slide the film holder into the slide adapter until the holder
touches the back of the film slot. Do not attempt to force the
holder in past the mark.
When removing the holder from the adapter, wait until the
status LED glows steadily, then slide the holder out by hand.
Do not use the eject button.
✔
Cautions
• If the holder does not slide smoothly into the adapter film
slot, remove it from the adapter and try again. Do not use
force.
• The film holder is for use with the MA-20 only. Do not
attempt to use the holder with other adapters.
• Before scanning, remove dust from the film with a blower or
brush.
• Do not use the eject button when removing the holder from
the adapter. Slide the holder out by hand.
Mark