Nikon LS-30 - Coolscan III - Manual (Page 33)

- 33 - Using the Scanner: Using the MA-20 S
LIDE
M
OUNT
A
DAPTER
Step 3—Close the FH-2
Close the FH-2, keeping the ends of the black lower and upper
holders aligned. Fasten the snap on the FH-2 and fit the ends of
the upper and lower holders together.
Step 4—Choose the frame to be scanned
The MA-20 can scan only one frame of film at a time. Slide the
black plastic holder to align frame to be scanned with one of
the two apertures in the metal part of the FH-2.
Step 5—Insert the FH-2 into the slide adapter
Insert the FH-2 in the film slot of the MA-20, with the “Nikon”
logo upwards. The direction of insertion depends on which of
the frames in the apertures of the metal part of the FH-2 is to
be scanned (in the illustrations below, the arrows show the
direction of insertion).
1
4
The first
frame will
be scanned
The fourth
frame will
be scanned
2
5
The second
frame will
be scanned
The fifth
frame will
be scanned
3
6
The third
frame will
be scanned
The sixth
frame will
be scanned