Nikon S6300 User Manual
Page 219
Troubleshooting
Te
chni
cal
Note
s and
In
de
x
F
9
Flash does not fire.
• The flash mode is set to W (off).
• Scene mode with which the flash does not fire
is selected.
•
On is selected for Blink proof in smart portrait
menu.
• Another function that restricts flash is enabled.
Digital zoom cannot be
used.
•
Digital zoom is set to Off in the setup menu.
• Digital zoom cannot be used in the following
situations.
- When
Scene auto selector, Portrait, Night
portrait, Night landscape, Backlighting
(when
HDR is set to On), Easy panorama,
Pet portrait, or 3D photography is
selected in scene mode
- When smart portrait mode is selected
- When subject tracking mode is selected
- When
Continuous in the shooting menu is
set to
Multi-shot 16
Image mode not
available.
Another function that restricts the
Image mode
option is enabled.
No sound when shutter is
released.
Off is selected for Sound settings > Shutter
sound in setup menu. No sound is produced with
some shooting modes and settings, even when
On is selected.
AF-assist illuminator does
not light.
Off is selected for the AF assist option in the
setup menu. AF-assist illuminator may not light
depending on the position of the focus area or the
current scene mode, even when
Auto is selected.
Images appear smeared.
Lens is dirty. Clean lens.
Colors are unnatural.
White balance or hue is not adjusted properly.
Randomly spaced bright
pixels (“noise”) appear in
image.
The subject is dark, so shutter speed is too slow or
ISO sensitivity is too high. Noise can be reduced
by:
• Using flash.
• Specifying a lower ISO sensitivity setting.
Images are too dark
(underexposed).
• The flash mode is set to W (off).
• Flash window is blocked.
• Subject is beyond flash range.
• Adjust exposure compensation.
• Increase ISO sensitivity.
• Subject is backlit. Select
Backlighting scene mode
or set the flash mode setting to X (fill flash).
Problem
Cause/Solution
A