Nikon L1 - Manual (Page 20)

10
Basic Phot
og
raph
y and Pla
yback
2.1 Turn the camera on
The power-on lamp will light and the monitor
will turn on. To turn the camera off at any time,
press the power switch again. Do not remove
the batteries while the power-on lamp is lit.
2.2 Check indicators in the monitor
Check the battery level and number of expo-
sures remaining.
Display Battery level
NO ICON Batteries fully charged.
Low battery; ready spare batteries.
WARNING!!
BATTERY
EXHAUSTED
Batteries exhausted. Replace batteries.
Number of exposures
remaining ( 67)
AUTO AUTO AUTO 6 6
Basic Photography and Playback
Mode
This section describes how to take pictures in (auto) mode, an automatic, “point-
and-shoot” mode recommended for fi rst-time users of digital cameras.
1
Select mode
Slide the mode selector to .
2
Turn the camera on
Auto Power off (Stand-by Mode)
If no operations are performed for about a minute, the monitor will turn off and the camera
will enter stand-by mode to reduce the drain on the battery. While the camera is in stand-
by mode, the power-on lamp will blink and the monitor can be reactivated by pressing the
shutter-release button halfway. The camera will turn off automatically if no operations are
performed for another three minutes.