Nikon WT-4A D4 D3X D3 D800 D700 D300S D300 - Manual (Page 87)

75
U
p
load pi
ct
ur
e
s t
o
a host
c
o
m
p
ut
e
r / U
p
loadi
n
g
Im
ag
es
Using the WT-4 with a Computer
3
Turn the WT-4 off and wait for the
POWER
LED (pg. 3) to turn from green to
yellow and then go out. Disconnect the
USB cable. The destination folder
selected in the Setup Utility (pg. 50) will
open automatically when the
connection between the computer and
the WT-4 is terminated.
❏ Interrupting Transmission
To cancel transmission of images marked with a white “send” icon
or green “sending” icon, select the images during playback and
press the center of the multi selector while pressing the
N button
(D3) or the J button (D300). The icon will be removed. Any of the
following actions will also interrupt transmission:
• Turning the camera or WT-4 off
• Selecting [Yes] for [Wireless transmitter] > [Transfer
settings] > [Deselect all]
D
During Upload
Do not remove the memory card or disconnect the Ethernet cable during
upload.
A
Voice Memos
Voice memos can not be uploaded separately, but will be included when
associated pictures are transmitted. Voice recordings can not be selected
for upload.
A
Loss of Signal
Transmission may be interrupted if the signal is lost (pg. 77). Transmission
can be resumed by turning the WT-4 off and then on again.
A
Turning the Camera Off
“Send” marking will be saved if the camera or WT-4 is turned off while
transmission is in progress. Transmission of images marked with a “send”
icon will resume when the camera or WT-4 is turned on.