Nikon WT-4A D4 D3X D3 D800 D700 D300S D300 - Manual (Page 35)

C
o
nf
ig
u
rin
g t
h
e
Ne
tw
o
rk
/ Win
d
ow
s V
is
ta
/
C
o
nn
ec
ti
ng
to
a
n
I
n
fr
a
stru
c
tu
re
Introduction
23
4
After entering a network name and choosing security options
to match those selected for the wireless LAN access point,
click [Next].
• Network name: Enter a name of up to 32 characters.
• Security type: Choose from [No authentication (Open)], [WEP],
[WPA-Personal], and [WPA2-Personal]. [WPA-Enterprise],
[WPA2-Enterprise], and [802.1x] can not be used with the
WT-4.
• Encryption type: The type of encryption available depends on
the options selected for [Security type]:
❏ None (open system): [None]
❏ WEP: [WEP]
❏ WPA, WPA2: [TKIP], [AES]
• Security key/Passphrase: If [WEP] is selected for [Security type],
enter a 5- or 13-character ASCII key or 10- or 26-digit
hexadecimal key. Entering a five-character ASCII or ten-digit
hexadecimal key enables 64-bit encryption, a 13-character
ASCII or 26-digit hexadecimal key 128-bit encryption. ASCII
keys may contain letters, punctuation, and the numbers 0–9,
hexadecimal keys the numbers 0–9 and the letters a, b, c, d,
e, and f. If [TKIP] or [AES] is selected for [Security type], enter
an ASCII key of 8 to 63 characters or a 64-digit hexadecimal
key.