Nikon WT-4A D4 D3X D3 D800 D700 D300S D300 - Manual (Page 21)

9
Pr
ep
ari
n
g
th
e W
T-
4
Introduction
3
Close the battery-chamber cover.
A
Removing the Battery
Being careful not to drop the battery, open the
battery chamber cover and remove the battery as
shown at right.
A
Stand-By Mode
When disconnected from the camera, the WT-4 will turn off automatically
after the delay chosen for the [Auto power off ] option in the [Wireless
transmitter] menu (pg. 173), reducing the drain on the battery. Note that
the WT-4 will not turn off automatically when transmitting data to a
computer in thumbnail select mode (pg. 79).
A
Battery Level
The level of the battery inserted in the WT-4 can be determined by
connecting the WT-4 to the camera (pp. 70, 81, 90, 102, 140) and checking
the battery level using the [Battery info] option (pg. 172) in the camera
setup menu.
A
The EH-6 AC Adapter
The optional EH-6 AC adapter can also be used to
power the camera when the WT-4 is connected.
Connect the DC plug on the AC adapter to the
WT-4 DC-IN connector, not to the camera.