Nikon WT-4A D4 D3X D3 D800 D700 D300S D300 - Manual (Page 77)

65
C
o
pyi
n
g
Ne
tw
o
rk Pr
o
fil
es
to
t
h
e
C
a
m
e
ra
/ I
n
fr
a
stru
c
tu
re
N
e
tw
o
rk
s
Using the WT-4 with a Computer
9
Enter the following information and click [Next].
• Network name (SSID): Enter a network name or choose from a
list of existing networks. Do not change the name if it is
supplied automatically.
• Communication mode: Select [Infrastructure].
• Authentication: Choose the authentication used on the
network. In infrastructure mode, the camera supports WPA-
PSK, WPA2-PSK, open system, and shared key
authentication.
• Encryption: Choose the encryption used on the network. The
options available depend on the authentication used:
Open : None, 64- or 128-bit WEP Shared : 64- or 128-bit WEP
WPA-PSK : TKIP, AES WPA2-PSK : AES
• Encryption key: If the network uses encryption, enter the
network key. The number of characters required depends
on the type of key used:
• Key Index: If [WEP64] or [WEP128] is selected for [Encryption],
choose a key index (the default index is [1]). A key index is
not required when [None] is selected.
WEP (64-bit) WEP (128-bit) TKIP, AES
Number of characters (ASCII) 5 13 8–63
Number of characters (hex) 10 26 64