Using the zoom – Nikon L610 User Manual
Page 45
27
The
Basic
s of
Shootin
g
and Playbac
k
Using the Zoom
Rotate the zoom control to activate optical zoom.
• To zoom in closer to the subject, rotate the zoom
control to
g (telephoto).
• To zoom out and view a larger area, rotate the zoom
control to
f (wide-angle).
When you turn the camera on, the zoom moves to the
maximum wide-angle position.
• The zoom operates quickly when you rotate the zoom
control fully, and operates slowly when you rotate the
zoom control partially (except when recording movies).
• A zoom indicator is displayed at the top of the monitor
when the zoom control is rotated.
• If you rotate the zoom control to g when the camera is
zoomed in to the maximum optical zoom position, you
can use the digital zoom to magnify the image by up to 2×.
B
Easy Auto Mode
• Depending upon shooting conditions, the camera may not select the desired scene mode. In this
case, select another shooting mode (
• When the digital zoom is in effect, the scene mode changes to U.
C
When Using a Tripod
• We recommend using a tripod to stabilize the camera in the following situations:
- When shooting in dark conditions with the flash lowered, or when shooting in dark conditions
using a shooting mode in which the flash does not fire
- When zooming in on the subject
• Set Vibration reduction to Off in the setup menu (A 98) when using a tripod.
Zoom out
Zoom in
Optical zoom Digital zoom
C
Digital Zoom and Interpolation
When using the digital zoom, image quality deteriorates when zooming
in past V in the zoom indicator.
The position of V is more to the right when shooting smaller images;
therefore, when the image size is smaller (as determined by the image
mode setting;
A 64, E39), more digital zoom can be applied without
image quality deterioration.
Small image size