Auto off – Nikon L610 User Manual
Page 199
E
81
Re
fere
nce
S
ecti
o
n
Auto Off
If no operations are performed for a specified amount of time, the monitor turns off and the
camera enters standby mode to save power (
This setting determines the amount of time that passes before the camera enters standby
mode.
You can select 30 s, 1 min (default setting), 5 min, or 30 min.
d button M z tab M Auto off M k button
C
When the Monitor Has Turned Off to Save Power
• When the camera is in standby mode, the power-on lamp flashes.
• If no operations are performed for approx. another three minutes, the camera turns off
automatically.
• When the power-on lamp is flashing, pressing any of the following buttons turns the monitor back
on:
➝ Power switch, shutter-release button, A button, c button, or b (e movie-record) button
C
Notes About Auto Off
• The time that passes before the camera enters standby mode is fixed in the following situations:
- When a menu is displayed: Three minutes (when auto off is set to 30 s or 1 min)
- During slide show playback: Up to 30 minutes
- When the audio/video cable is connected: 30 minutes
- When an HDMI cable is connected: 30 minutes
• The camera does not enter standby mode while the Eye-Fi card is uploading images.