PerTronix Dougs Headers D3385Y-1 - Manual (Page 4)

Part No. 0110-003022
Page 4
Rev 1 3-5-13 DSL
PARTS / HARDWARE LIST
Qty. Description
1 Right side header
1 Left side header
1 Y-Pipe assy.
1 Connector Pipe
2 Header gaskets
2 Conical gaskets
1 3/8” Spacer, 1” long, mild steel
1
3/8” Spacer, 1-1/8” long, mild steel
1 3/8” Spacer, 1-¾” long, mild steel
4 ¼” Spacer, ¾” long, aluminum
4 ¼-20 x 1-
¼” Hex head cap screw
4 ¼” Lock-washer
1 Hot air pickup
1 Worm gear hose clamp, S.S., #24
12
3/8”-16 x 1-¼” header bolt
18 3/8” Lock-washer
6 3/8” Hex nut
6
3/8”-16 x 1-3/4” hex head cap screw
1 Plug, O 2 Sensor, 18mm
1 Installation instruction sheet
1 Warranty statement sheet
1
Doug’s merchandise card
1 Decal: DOUG’S HEADERS
1 Sticker, C.A.R.B., E.O., D-57-19
TOOLS / LUBRICANTS / SEALERS REQUIRED LIST
Description
Heating torch
Mig welder
Cut-off saw
Sawzall
® (or equivalent) w/metal cutting 6” blade
3/8”, 7/16”, 9/16”, ½”, ¾”, 7/8”, 10mm and 13mm wrenches
9/16” Line wrench (flare nut)
5/16”, 7/17”, ½” and 9/16” sockets
3/8” & 7/16” and15mm deep sockets
5/8” spark plug socket
Ratchet and extensions
Pliers and an adjustable jaw wrench
Torque wrench
Rust penetrant
Anti-seize compound
High temp (700
° F “sensor-safe” silicon sealer: