Spektrum SPMAR6400LBL - Manual (Page 3)

EN
3
AR6400LBL User Guide
The AR6400LBL 6-channel ultra micro receiver with integrated long throw servos, brushless speed
control and X-Port ™ technology is designed for ultra micro aircraft. Featuring DSM2 ™ technology
the AR6400LBL is compatible with all Spektrum ™ , JR ® , E-flite ® and ParkZone ® 2.4GHz DSM2
technology transmitters including: Spektrum DX7, DX6i, DX5e, Spektrum Module Systems, JR
12X, JR X9303, E-flite LP5DSM, E-flite HP6DSM, E-flite MLP4DSM and ParkZone’s 2.4GHz DSM2
Transmitter.
Note: The AR6400LBL receiver is not compatible with the DX6 park flyer radio system.
Features
• 6-channel ultra micro receiver
• Two integrated linear long throw servos (elevator and rudder)
• Integrated programmable brushless speed control
• Weighs just 7.8 grams
• Compatible with optional Spektrum ultra micro linear servos; 1.5-gram
(SPMAS2000) 1.7-gram (SPMAS2000L)
• Smart Bind ™ technology
• X-Port allows for future expansion
Applications
The AR6400LBL is designed for ultra micro aircraft and is ideal for scratch-built ultra
micro projects. The AR6400LBL is designed to utilize a two-cell LiPo battery. You can
use an integrated brushless speed controller to power a brushless motor up to 3-amps
of continuous current. An integrated X-Port feature allows for future expansion.
Note: When X-Port is active, CH5 and CH6 are not available; however, reversed aileron
(CH2) is still available.
AR6400LBL Specifications:
Type: DSM2 ultra micro receiver with integrated brushless speed controller and two linear servos
Channels: 6 channels or 4 channels plus X-Port
Modulation: DSM2
Dimension (WxLxH): 37.60 x 28.55 x 8.00mm
Weight: 7.8 g
Input Voltage Range: 2-cell LiPo 6.4 to 8.4V
Antenna Length: 31mm
Resolution: 1024
Compatibility: All DSM2 aircraft transmitters
Servos:
Force: 2.8 oz (79 g)
Stroke: 9.1mm
Speed: 0.14 sec
Stall current: 80mA at 4.2V without load
Speed Controller:
Type: Integrated programmable brushless
Max continuous current: 3.0 amps
Overload protection current: 5A for 500ms
BEC continuous current: 1A
BEC overload protection current: 1A, 4.2V
Low-voltage cutoff: <6.3V motor pulsing, <6.1V motor cuts off and LED flashes
Over-current protection: 3.5A motor cuts off until throttle stick is pulled down to idle
Temperature protection: 120C motor cuts off
Programming features: See the “Programming the Brushless ESC” Section
US Patent D578,146. PRC patent ZL 200720069025.2. Other Patents Pending.