Allied Telesis AT-8324SX - Manual (Page 38)

Installing the Stack
38
Reviewing Safety Precautions
Review the following safety precautions before you begin to install the
switch. Refer to Appendix C for translated safety statements in your
language. The first two safety precautions apply only if you install an
expansion module in the switch.
Warning
Class 1 laser product.
" 5
Warning
Do not stare into the laser beam.
" 6
Warning
Electric Shock Hazard: To prevent electric shock, do not remove
the cover. There are no user-serviceable parts inside. The unit
contains hazardous voltages and should only be opened by a
trained and qualified technician.
" 7
Warning
Lightening Danger: Do not work on this equipment or cables
during periods of lightening activity.
" 8
Warning
Power cord is used as a disconnection device: To de-energize
equipment, disconnect the power cord.
" 9
Warning
Electrical-Type Class 1 Equipment: This equipment must be
earthed. The power plug must be connected to a properly wired
earth ground socket outlet. An improperly wired socket outlet
could place hazardous voltages on accessible metal parts.
" 10
Caution
Pluggable Equipment: The socket outlet should be installed near
the equipment and should be easily accessible.
" 11
Caution
Air vents: The air vents must not be blocked on the unit and must
have free access to the room ambient air for cooling.
" 12
Caution
Operating Temperature: This product is designed for a maximum
ambient temperature of 40°C.
" 13
Caution
All Countries: Install this product in accordance with local and
National Electric Codes.
" 14