Allied Telesis AT-8550 - Manual (Page 20)

Factory Defaults
1-12
Factory Defaults
Table 1-5 shows factory defaults for the all switch models.
Table 1-5 Switch Factory Defaults
Item Default Setting
Port status Enabled on all ports
Serial or Telnet user
account admin with no password and user with no password
Console port configuration 9600 baud, eight data bits, one stop bit, no parity, XON/XOFF
flow control enabled
Web network management Enabled
SNMP read community
string Public
SNMP write community
string Private
RMON history session Enabled
RMON alarms Disabled
BootP Enabled on the default VLAN (default)
QoS All traffic is part of the default queue.
802.1p priority Recognition enabled
802.3x flow control Enabled
Virtual LANs One VLAN named default; all ports belong to the default VLAN.
The default VLAN belongs to the STPD named s0.
802.1Q tagging All packets are untagged on the default VLAN (default).
Spanning Tree Protocol Disabled; one STPD (s0)
IP Routing Disabled
Forwarding database aging
period 300 seconds (5 minutes)
RIP Disabled for the switch; enabled on each VLAN configured with
an IP address.
OSPF Disabled for the switch; enabled on each VLAN configured with
an IP address. All VLANs belong to the backbone area.
IP multicast routing Disabled
DVMRP Disabled for the switch; enabled on each VLAN configured with
an IP address.
IGMP snooping Disabled for the switch; enabled on each VLAN configured with
an IP address.
GVRP Disabled