Allied Telesis FastSwitch8 - Manual (Page 11)

5
Chapter 2
Installation
Before you Proceed
Before installing the LanEdge FastSwitch8, make sure you read “FCC
Compliance Statement” on page iii.
Use this section to verify your package contents, position the device, and
configure it.
Verifying the FastSwitch8 Package Contents
Your Ethernet switch package should include the following items:
❑ One FastSwitch8 switch
❑ Accessory bag containing rubber feet and bumpers for desktop
placement, and screws for wall mounting unit
❑ AC power adapter
❑ Power cord
❑ This installation guide
❑ Warranty card
If any of the above items are damaged or missing, contact your representative
immediately.