Allied Telesis AT-LMC10ST - Manual (Page 33)

AT-LMC10SC and AT-LMC10ST Installation Guide
23
1 RFI Emission EN55022 Class B
2 Immunity EN55024
3 Warning: This product requires shielded cables to comply with emission
and immunity standards. If it is used with unshielded cables, the user may
be required to take measures to correct the interference problem at their own
expense.
4 Electrical Safety EN60950 (TUV), UL1950 (
c
UL
us
)
Safety
5 Laser EN60825
6 Warning: Class 1 Laser product.
7 Warning: Do not stare into the Laser beam.
At time of installation, the Fiber Optic Lasers comply with FDA Radiation
Performance Standard 21CFR Subchapter J, applicable at date of
manufacture. Use of controls or adjustments of performance or procedures
other than those specified herein may result in hazardous radiation
exposure.
8 Lightning Danger
Danger: Do not work on equipment or cables during periods of lightning
activity.
9 Do not block air vents
10 Power to the hub must be sourced only from the adapter.
USA/Canada
Use a UL Listed/CSA Certified AC adapter of DC 12V, 500mA.
Europe - EU
Use TÜV licensed AC adapter of DC 12V, 500mA.
UK
Use a UK Safety Approved AC adapter of DC 12V, minimum 500mA.
11 Operating Temperature: This product is designed for a maximum
ambient temperature of 40 degrees C.
12 All Countries: Install product in accordance with local and National
Electrical Codes.