Allied Telesis AT-LMC10ST - Manual (Page 11)

1
Chapter 1
Overview
The AT-LMC10 Series Ethernet Media Converters include the following
models:
❑
AT-LMC10SC
❑
AT-LMC10ST
The AT-LMC10 Series Ethernet Media Converters are designed to extend the
distance of your network by interconnecting LAN devices that are physically
separated by large distances. These media converters have the functionality to
connect any managed/unmanaged 10Mbps switch or hub using standard
10Base-T RJ-45 connections and convert the signal to 10Base-FL fiber.
Each AT-LMC10 Series media converter features a 10Base-T twisted pair port
and a 10Base-FL fiber optic port. The twisted pair port has an RJ-45
connector and a maximum operating distance of 100 meters (328 feet). The
fiber optic port has a multi-mode ST or SC connector and a maximum
operating distance of 2 kilometers (1.2 miles). These units operate at 10 Mbps
and feature half- and full-duplex operation.
The media converters can be installed on a desktop or in an AT-MCR12
chassis. The AT-LMC10 Series Media Converters are easy to install and do
not require any software configuration or management. Figure 1 and Figure 2
display the front panel of the AT-LMC10 Series Media Converters.
Figure 1 AT-LMC10SC Model Converter - Front Panel
TX RX
AT-LMC10SC ETHERNET MEDIA CONVERTER
CLASS 1
LASER PRODUCT
DO NOT STARE
INTO BEAM
10Base-FL 10Base-T
PWR
REC
LNK
MDI-X MDI
REC
LNK