Allied Telesis AT-FS203 User Manual
Page 25
AT-FS200 Series Installation Guide
15
❑
Refer to Table 4 for the cabling specifications for the fiber optic port
operating in full-duplex mode.
Note
Refer to Appendix A for further information on the technical
specifications of the fiber optic port on the switch.
Table 4 100Base-FX Fiber Optic Cabling Specifications (Full-duplex) for Port 2
Model
Type of Fiber
Optic Cable
Maximum
Distance
Maximum Allowable
Loss Budget
AT-FS201
50/125 or
62.5/125 micron
multimode
2 km (1.2 mi)
13 dB at 1310 nm
AT-FS201ST/FS1
50/125 or
62.5/125 micron
multimode
2 km (1.2 mi)
13 dB at 1310 nm
9/125 micron
single-mode
15 km (9.3 mi)
16 dB at 1310 nm
AT-F201ST/FS2
9/125 micron
single-mode
40 km (24.8 mi)
30 dB at 1310 nm
AT-FS201ST/FS3
9/125 micron
single-mode
75 km (46.5 mi)
33 dB at 1310 nm
AT-FS202
50/125 or
62.5/125 micron
multimode
2 km (1.2 mi)
13 dB at 1310 nm
AT-FS202SC/FS1
50/125 or 62.5/
125 multimode
2 km (1.2 mi)
13 dB at 1310 nm
9/125 micron
single-mode
15 km (9.3 mi)
16 dB at 1310 nm
AT-FS202SC/FS2
9/125 micron
single-mode
40 km (24.8 mi)
30 dB at 1310 nm
AT-FS202SC/FS3
9/125 micron
single-mode
75 km (46.5 mi)
33 dB at 1310 nm