Allied Telesis AT-FS203 - Manual (Page 11)

1
Chapter 1
Description
The AT-FS201, AT-FS202, and AT-FS203 Series of Fast Ethernet Switches
are designed to interconnect LAN devices and subnetworks over large
distances into an integrated network. These dual-port switches can also be
used to improve the performance of your network by dividing it into smaller,
more manageable segments.
The AT-FS201 and AT-FS202 Switches feature one 10/100Base-TX twisted
pair port with an operating distance of 100 meters (328 feet), and a
100Base-FX fiber optic port with an operating distance of 2 kilometers (1.2
miles) to 75 kilometers (46.5 miles), depending on the model.
The AT-FS203 Switch features two 10/100Base-TX ports, each with a
maximum distance of 100 meters (328 feet).
These Fast Ethernet switches can be installed either as standalone units,
such as on a table, or in an AT-MCR12 or AT-TRAY4 Chassis. They are easy
to install and do not require software configuration or management. The
following figures illustrate the front and rear panels of each switch.
Figure 1 AT-FS201 Front Panel
10Base-T/
100Base-TX
AUTO NEG
10Base-T/
100Base-TX
MDI MDI-X
FS201 FAST ETHERNET SWITCH IEEE 802.3 / 802.3U
AUTO NEG
TX
RX
COL
LNK
PWR
100
FD
MDI MDI-X
TX
RX
COL
LNK
100
FD
PORT 2 PORT 1
TX RX