Allied Telesis AT-VIEW PLUS 3.0 VLAN MANAGER User Manual

Page 17

Text mode
Original mode

Allied Telesyn

AT-VIEW PLUS

VLAN MANAGER

SNMP

Version

This drop down list allows you to select the SNMP version to use in managing the target
device.

Note

- Before choosing "v2c" or "v3", make sure that the target device you are connecting to

supports SNMP v2c and/or SNMP v3 respectively.

Settings

If the Version is set to "v1" or "v2c", this button opens the SNMP v1/v2c Settings window.
Otherwise, if the Version is set to "v3", this button opens the SNMP v3 Settings window.

SNMP v1/v2c Settings dialog box

Community Name

The community strings to use in performing SNMP operations on the target host. There are
three types of community strings for SNMP. Be sure to specify strings which match the ones
configured on the target host.
By default, the following strings are used:

for the 'Get' operation

public

for the 'Set' operation

private

PN 613-50666-00 Rev A

Page 17 of 52